![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/b5efd0f3e7225a96a025c5abccc4f5a2_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/4d0082a537c0a1a6886395dca8a96d45_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/36ec0f9a16fa438c0e8d441d3bff549c_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/74eabbdb1418bc24d72fdb494bc7302a_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/99ea79cea4d10d0baa79f9a0a6052dc0_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/388fc2b1f910e86f9902295466b8688b_preview_featured_110x110_crop_center.jpg?v=1515419968)
![Load image into Gallery viewer, Pumps (t9.33) - Designed by Davidsson](http://3dshoes.com/cdn/shop/products/b640932e2168ca320e7ba709a43c4ffd_preview_featured_110x110_crop_center.jpg?v=1515419968)
Pumps (t9.33) - Designed by Davidsson
Regular price $ 0.00
Unit price per
Experiment with concealed and slanted platform
NOTES TO PRINTERS:
Original scaling fits size 8USW (~39EU), only uniform scaling reconmended
Print in upright position
4.206t9.33preview.STL is a preview (duh) and NOT intended for printing
Use 4.206t9.33Lc.STL and 4.206t9.33Rc.STL if your printer can print at least 203mm high for 100% scaling, else try 4.206t9.33L.STL, 4.206t9.33R.STL, 4.206t9.33L2.STL, and 4.206t9.33R2.STL, which require 172mm height at 100% scaling.
Reconmended to print in ABS, PLA is possible, but probably structurally inadequate
Open the hole in the bottom of the heel after printing to install a 131x6mm steel threaded rod, keep in mind that these dimensions change when scaled to a different size!
cut the heel core only to size after inserting
Printable in one piece
Infill >30% reconmended
Print support from buildplate only
The fin spanning the heel and the sole is meant to be a custom support, remove after inserting the heel core, before acetone treatment
PRINT SETTINGS
Printer: ZYYX+
Resolution: 0.300mm
Infill: 30%