3D Shoes 3D Shoes
  • News
    NewsShow More
    Maple Yumei Qiu poses with Umei shoes outside of her Manhattan Beach home recently. (Photo by Melissa Heckscher, The Beach Reporter/SCNG)
    How a Mom’s Love Sparked a Footwear Revolution: The Story Behind UMEI’s 3D-Printed Recovery Slides
    May 1, 2025
    A sample of a superconductor 3D printed from a single seed — this one shaped like a paper airplane — is shown levitating over a magnet. Credit: Dingchang Zhang . Source: Fermilab.
    The Science Behind Printing a Superconductor: How Northwestern and Fermilab Did the Impossible
    April 30, 2025
    Built for a circular future. Leftover powder? Reclaimed. Old sandals? Fully recyclable. Holis 3D closes the loop on sustainability. 🔄🌍
    Why the Holis 3D Shoe Is the Future of Sustainable Fashion
    April 29, 2025
    Desktop 3D printer with colorful, low-priced filament spools and “duty-free” tags, symbolizing cheaper 3D-printing materials and fewer tariff barriers in 2025-2030.
    3D Printing Materials Outlook 2025 – 2030: Cheaper Filaments & Fewer Tariff Headaches
    April 24, 2025
    Diagram of benzene molecule (C6H6) with “VOC” and “Group 1 Carcinogen” badges
    Why Scientists Are Warning About Benzene Emissions in 3D Printing
    April 18, 2025
  • Design
    DesignShow More
    A pigmented O° shoe featuring a black 3D-printed structure overlaying a grey textile base layer Image: Courtesy of OXMAN
    OXMAN’s O° Platform: Pioneering 100% Biodegradable 3D-Printed Footwear
    January 29, 2025
    The First AI Shoe
    Stepping into the Future: Reebok’s Co-Founder Teams Up with Young Innovator to Revolutionize Footwear through AI and 3D Printing
    January 23, 2025
    CamperLab’s Tossu Shoe Gets an Update From Mr. Bailey’s Concept (K)
    CamperLab x Mr. Bailey’s Tossu Shoe – A Design Revolution
    December 17, 2024
    Balenciaga's 'Zero' shoes
    Balenciaga’s ‘Zero’ Shoes: Because Who Needs Function When You Have Fashion?
    December 6, 2024
    NIKE Airmax 1000 Behind the Design
    Nike Releases 3D Printed Nike Air Max 1000 with Zellerfeld
    November 15, 2024
  • Trends
    TrendsShow More
    Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design
    3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes
    May 8, 2025
    Side-by-side comparison of the Adidas 3D-Printed ClimaCool (left) and the Zellerfeld HEZI Slide (right), showing the ClimaCool’s fine hex lattice versus the HEZI Slide’s thicker diamond lattice.
    Adidas ClimaCool vs Zellerfeld 3D-Printed Shoes: Which Futuristic Sneaker Wins?
    May 5, 2025
    Photo: Neyla Coronel
    How 3D Printing Is Reinventing Lingerie: The Custom-Fit, Eco-Smart Future of Intimate Apparel
    April 29, 2025
    Adidas 3D-Printed ClimaCool
    Adidas 3D-Printed ClimaCool: Release Guide & Buy Links for May 2
    May 4, 2025
    Illustration of compact 3D printers in a modern workshop with product parts on the build plates, a “Tariff-Free” badge, and a digital chart showing rising tariffs—conveying local, on-demand manufacturing as a response to high import taxes.
    From Prototype to Profit: Launch a Tariff‑Proof Product Line with On‑Demand 3D Printing
    April 21, 2025
  • Recommended Picks
    Recommended PicksShow More
    CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
    CAD for Kids – Build, Create & Learn — Our Full Project-Based Review
    May 8, 2025
    Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    🎀 Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    April 29, 2025
    3D Printing from Zero to Hero in Blender – FDM & MSLA - Course Review
    3D Printing from Zero to Hero in Blender – FDM & MSLA: Build, Create & Learn — Our Full Project-Based Review
    April 12, 2025
    Master 3D Printing: Transforming the Future of Manufacturing on Udemy: A Complete Review for Beginners & Pros
    Master 3D Printing: Transforming the Future of Manufacturing on Udemy: A Complete Review for Beginners & Pros
    April 12, 2025
    Adidas Racer TR23
    Adidas Racer TR23 Shoes Review: Comfort, Style, and Value You Can’t Ignore
    September 5, 2024
Reading: IGUANEYE freshoe : Ultra-minimal shoes inspired by Amazonian
Fuel Our Steps
Font ResizerAa
3DSHOES.COM3DSHOES.COM
  • News
  • Design
  • Recommended Picks
  • STL Files
Search
  • Home
  • News
  • Design
  • Recommended Picks

3D Printed Wearables Collection

R_Shoes R_Shoes June 26, 2024
5.9kLike
4kFollow
3.7kPin
3.7kFollow
  • Home
  • About
  • STL Files
  • Contact
© 2024 3DSHOES.com. All Rights Reserved.
3DSHOES.COM > News > News > IGUANEYE freshoe : Ultra-minimal shoes inspired by Amazonian
News

IGUANEYE freshoe : Ultra-minimal shoes inspired by Amazonian

R_Shoes
Last updated: June 26, 2024 9:29 pm
By R_Shoes 8 Min Read
Share
SHARE
Iguaneye freshoe brings Amazonian foot protection back with a cutting-edge minimal, yet modern, sneaker.
“…may be the world’s most minimal shoe” – Fast Company ; “…we definitely commend the brand for going above and beyond in the name of innovation.” – Sneaker Report ; “…we hope he reaches his funding…” – Core77 ; ” Iguaneye have stripped the shoes back to the bare minimum…” – Sneaker Freaker ; “…you can run and walk long distance…” – Shoes-up ; “…a second-skin that perfectly follows your movements…” – Bless this stuff ; ” Nice ! “ – Mocoloco

/////////////////////////////////////////////////////////////////////////////////

Do you remember this amazing advertising in which Carl Lewis was running around with tires stuck under his feet ? This dream of being able to run barefoot on every kind of ground has inspired IGUANEYE to design the freshoe.

Feel the air and still be able to run… 

IGUANEYE freshoe is an ultra-minimal foot protection that allows you to move like you want on every kind of ground.

Your feet breathe, freed from the warmth of closed shoes.

Your feet are held, so you can run, jump and do whatever you want…

Your feet are protected, so you can move on rough grounds.

What is so special ?

The main body of the IGUANEYE freshoe is like a second skin : one piece construction, organic design, no glue, no seams. They cling to your feet with a unique heel cup and a special integrated first toe cover (unlike flip-flops, the piece that parts the toes is placed slightly ahead). All sensitive parts of your feet are protected so you feel confident, as if you were wearing conventional shoes.

The shape of the Iguaneye has been designed to perfectly conform to the contours of your foot. The anatomic form has been custom-made by Dulster Design and provides a supportive, secure and extremely comfortable fit. The advanced elastomer used for the main body is soft and very flexible, neutral, hypoallergenic, and 100% recyclable.

The main body is ventilated with lateral channels that constantly use the up and down motion of the foot to bring fresh air in and up through the ventilated insole, which is removable and replaceable.

Our insoles are handmade in Portugal using an innovative technology in which a micro-net is incorporated at the molding stage that allows the cork (98%) to bond with natural latex (2%) and create a flexible, adaptable insole that can adjust to your unique foot impression.

The insole is covered with a soft leather contact surface which further conforms to your foot pad.  This natural dual layer insole not only supports, but cork is a naturally antibacterial material, which absorbs sweat and prevents odors, ensuring both hygiene and comfort.  At  the £50 support level you will receive two insoles, which are useful for switching after a long run or walk.  Change to a fresh pair for casual wear while your first pair regenerates.  Additional insoles will be available through our website, if you ever want to replace or change the color.

Where did this come from ?

We have been working for two years to develop the IGUANEYE freshoe. Sketches, mock-ups, tests, and 3D prototypes…

First we reproduced the Amazonian technique, mentioned in our video, by soaking our feet in latex.

Then we made a lot of sketches.

We gave our first mock-up to dancers and gymnasts to see how they performed under extreme movement.

 

We then spent a lot of time on a CAD system revising, then revising, and revising some more.

Next, we produced more prototypes, using additive manufacturing, then we revised some more, until we came to this:  The IGUANEYE freshoe, the closest you will ever get to bare feet without sacrificing protection or movement.  But all of our work means nothing without you!

We need you !

The largest challenge with making shoes, is that we have to make moldings and tools for each size. The main body of IGUANEYE freshoe is a complex elastomer injected part, and it needs a specialized mold to be made.  Each size of insole needs a complex press to form and meld the cork and leather.  These types of molds are very expensive. 

We have almost completed the process for four sizes, but we need your help to finish all 10 and start our first runs.

What is in it for you ?

15£ = 1 original print (8×12 inches) of our original illustration by Jeanne Detallante. Worldwide free shipping.

25£ = 1 t-shirt with IGUANEYE logo in front and our original illustration by Jeanne Detallante in the back. Size S to 3XL. Worldwide free shipping.

40£ = 1 pair of IGUANEYE freshoes (comes with 1 pair of cork+leather hide insoles – colors to choose from, compose your own version). Worldwide free shipping.

50£ = 1 pair of IGUANEYE freshoes (comes with 1 pair of cork+leather hide insoles – colors to choose from, compose your own version) + 1 extra pairs of insoles. Worldwide free shipping.

Kickstarter Special : Mix your own version

There are four colors for the main body (light grey, blue, purple, anthracite) and four colors for the insoles (blue, orange, green, grey). If our campaign is successful, you will be able to create your own pairing by choosing the colors for both the main body and the insole try out our configurator on our website : http://en.iguaneye.com/html/configurateur.htm

Find your size

The  IGUANEYE freshoe is available in whole European sizes from 36 to 45, and during wear will continue to adapt to your feet.  To make sure that you receive the size that fits you the best, please use our IGUANEYE size validation tool on our website (http://en.iguaneye.com/html/conseils_pointure).

If for some reason when you receive your order, the shoes don’t fit, just send it back, and we will make it right.

We have poured two years into this project and have had a lot of interest, but we need your help to make it happen!  Your support will get you a new pair of shoes, but it will also get you in on the ground floor of an entirely new brand and style of shoe.  Your support is what matters most, and if you have any questions, don’t hesitate to ask.  We want to hear from you!

 

 

SUPPORT THEIR CAMPAIGN: https://www.kickstarter.com/projects/1079536332/iguaneye-freshoe-ultra-minimal-shoes-inspired-by-a-0

Share This Article
Facebook Twitter Copy Link

Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Marketing banner displaying services: custom WordPress design, SEO optimization, and website maintenance.

Trending

Form-Finding Midsole 3d-Printed Running performance by Nolan Kim

Nolan Kim is another outstanding designer. Currently, he is working on projects at the intersection…

December 2, 2022

Medical Supplies For COVID-19

During this challenging time, I figured this article would be fitting. The 3D printing industry…

March 28, 2020

UnisBrands Giveaway!

After reading all these posts about 3D printed shoes, some of us wish that we…

May 12, 2018
5.9kLike
4kFollow
3.7kPin
3.7kFollow
Innovation & Trends

3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes

Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design

Introduction: Why 2025 Is the Tipping Point for Additive ManufacturingAdditive manufacturing has flirted with the mainstream for more than a decade, but 2025 is the first year it’s shipping finished…

R_Shoes May 8, 2025

Your may also like!

Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design
Innovation & Trends

3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes

R_Shoes May 8, 2025
CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
Project-Based Courses

CAD for Kids – Build, Create & Learn — Our Full Project-Based Review

R_Shoes May 8, 2025
Side-by-side comparison of the Adidas 3D-Printed ClimaCool (left) and the Zellerfeld HEZI Slide (right), showing the ClimaCool’s fine hex lattice versus the HEZI Slide’s thicker diamond lattice.
Innovation & Trends

Adidas ClimaCool vs Zellerfeld 3D-Printed Shoes: Which Futuristic Sneaker Wins?

R_Shoes May 5, 2025
Maple Yumei Qiu poses with Umei shoes outside of her Manhattan Beach home recently. (Photo by Melissa Heckscher, The Beach Reporter/SCNG)
News

How a Mom’s Love Sparked a Footwear Revolution: The Story Behind UMEI’s 3D-Printed Recovery Slides

R_Shoes May 1, 2025
loader

Our website stores cookies on your computer. They allow us to remember you and help personalize your experience with our site.

Read our privacy policy for more information.

Quick Links

  • Home
  • About
  • STL Files
  • Contact

Legal

  • Privacy Policy
  • Cookie Policy (EU)
  • Disclaimer
  • Terms & Conditions

Socials

Follow US
Crafted with love by PixelCrafted.Dev ❤
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
View preferences
{title} {title} {title}
Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Zero spam, Unsubscribe at any time.
adbanner
AdBlock Detected
Our site is an advertising supported site. Please whitelist to support our site.
Okay, I'll Whitelist
Welcome Back!

Sign in to your account

Lost your password?