3D Shoes 3D Shoes
  • News
    NewsShow More
    Maple Yumei Qiu poses with Umei shoes outside of her Manhattan Beach home recently. (Photo by Melissa Heckscher, The Beach Reporter/SCNG)
    How a Mom’s Love Sparked a Footwear Revolution: The Story Behind UMEI’s 3D-Printed Recovery Slides
    May 1, 2025
    A sample of a superconductor 3D printed from a single seed — this one shaped like a paper airplane — is shown levitating over a magnet. Credit: Dingchang Zhang . Source: Fermilab.
    The Science Behind Printing a Superconductor: How Northwestern and Fermilab Did the Impossible
    April 30, 2025
    Built for a circular future. Leftover powder? Reclaimed. Old sandals? Fully recyclable. Holis 3D closes the loop on sustainability. 🔄🌍
    Why the Holis 3D Shoe Is the Future of Sustainable Fashion
    April 29, 2025
    Desktop 3D printer with colorful, low-priced filament spools and “duty-free” tags, symbolizing cheaper 3D-printing materials and fewer tariff barriers in 2025-2030.
    3D Printing Materials Outlook 2025 – 2030: Cheaper Filaments & Fewer Tariff Headaches
    April 24, 2025
    Diagram of benzene molecule (C6H6) with “VOC” and “Group 1 Carcinogen” badges
    Why Scientists Are Warning About Benzene Emissions in 3D Printing
    April 18, 2025
  • Design
    DesignShow More
    A pigmented O° shoe featuring a black 3D-printed structure overlaying a grey textile base layer Image: Courtesy of OXMAN
    OXMAN’s O° Platform: Pioneering 100% Biodegradable 3D-Printed Footwear
    January 29, 2025
    The First AI Shoe
    Stepping into the Future: Reebok’s Co-Founder Teams Up with Young Innovator to Revolutionize Footwear through AI and 3D Printing
    January 23, 2025
    CamperLab’s Tossu Shoe Gets an Update From Mr. Bailey’s Concept (K)
    CamperLab x Mr. Bailey’s Tossu Shoe – A Design Revolution
    December 17, 2024
    Balenciaga's 'Zero' shoes
    Balenciaga’s ‘Zero’ Shoes: Because Who Needs Function When You Have Fashion?
    December 6, 2024
    NIKE Airmax 1000 Behind the Design
    Nike Releases 3D Printed Nike Air Max 1000 with Zellerfeld
    November 15, 2024
  • Trends
    TrendsShow More
    Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design
    3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes
    May 8, 2025
    Side-by-side comparison of the Adidas 3D-Printed ClimaCool (left) and the Zellerfeld HEZI Slide (right), showing the ClimaCool’s fine hex lattice versus the HEZI Slide’s thicker diamond lattice.
    Adidas ClimaCool vs Zellerfeld 3D-Printed Shoes: Which Futuristic Sneaker Wins?
    May 5, 2025
    Photo: Neyla Coronel
    How 3D Printing Is Reinventing Lingerie: The Custom-Fit, Eco-Smart Future of Intimate Apparel
    April 29, 2025
    Adidas 3D-Printed ClimaCool
    Adidas 3D-Printed ClimaCool: Release Guide & Buy Links for May 2
    May 4, 2025
    Illustration of compact 3D printers in a modern workshop with product parts on the build plates, a “Tariff-Free” badge, and a digital chart showing rising tariffs—conveying local, on-demand manufacturing as a response to high import taxes.
    From Prototype to Profit: Launch a Tariff‑Proof Product Line with On‑Demand 3D Printing
    April 21, 2025
  • Recommended Picks
    Recommended PicksShow More
    CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
    CAD for Kids – Build, Create & Learn — Our Full Project-Based Review
    May 8, 2025
    Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    🎀 Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    April 29, 2025
    3D Printing from Zero to Hero in Blender – FDM & MSLA - Course Review
    3D Printing from Zero to Hero in Blender – FDM & MSLA: Build, Create & Learn — Our Full Project-Based Review
    April 12, 2025
    Master 3D Printing: Transforming the Future of Manufacturing on Udemy: A Complete Review for Beginners & Pros
    Master 3D Printing: Transforming the Future of Manufacturing on Udemy: A Complete Review for Beginners & Pros
    April 12, 2025
    Adidas Racer TR23
    Adidas Racer TR23 Shoes Review: Comfort, Style, and Value You Can’t Ignore
    September 5, 2024
Reading: ZUBITS magnetic lacing – Metallics – Never tie laces again!
Fuel Our Steps
Font ResizerAa
3DSHOES.COM3DSHOES.COM
  • News
  • Design
  • Recommended Picks
  • STL Files
Search
  • Home
  • News
  • Design
  • Recommended Picks

Joshua Harker’s 3D-printed “Quixotic Divinity” Headdress

R_Shoes R_Shoes June 26, 2024
5.9kLike
4kFollow
3.7kPin
3.7kFollow
  • Home
  • About
  • STL Files
  • Contact
© 2024 3DSHOES.com. All Rights Reserved.
3DSHOES.COM > News > News > ZUBITS magnetic lacing – Metallics – Never tie laces again!
News

ZUBITS magnetic lacing – Metallics – Never tie laces again!

R_Shoes
Last updated: June 26, 2024 9:29 pm
By R_Shoes 4 Min Read
Share
SHARE
Magnetically transform your own shoes into easy no-tie kicks with cool new metallic bling. Reusable magnets last forever! 14 colors

Zubits magnetic lacing solution is the fastest and easiest way to get in and out of shoes. Just lace our powerful magnets onto your own shoes and never tie laces again. Help us develop all new Gold and Chrome Zubits® and bring some bling to your shoes. (patented)

ZUBITS CLOSURES PROVIDE ALL THESE BENEFITS…

  • No more tying, knots, double knots, or laces coming undone.
  • Slip into wide open shoes as if there were no laces at all. 
  • Close with a simple magnetic click.
  • Remove your shoes hands-free.
  • No more ugly messy bows. Just a clean looking shoe.
  • Shiny Gold & Chrome add bling to your kicks.
  • Magnetically pair up your shoes and organize them in new places. 
  • Without laces, your shoes double as easy slippers.

Give Zubits a try – Zubits closures have thousands of positive reviews from all sorts of people!

Zubits closures have thousands of positive reviews from all sorts of people!

Amazing Strength – Zubits high-tech magnets are incredibly strong. Really, you won’t believe it. They can hold up to 17lbs of force and stay secure for running, parkour, going to the gym, or playing recreational sports. Thanks to Bay Area Movement for the parkour (bamvmnt.com)!

Zubits high-tech magnets are incredibly strong. Really, you won't believe it. They can hold up to 16lbs of force and stay secure for running, parkour, going to the gym, or playing recreational sports. Thanks to Bay Area Movement (parkour)!

Fast, simple, magnetic closing – Just pull the magnets together and close with a click. 

Fast, simple, magnetic closing. Just pull the magnets together and close with a click.

Wide open shoes – Easily slip into wide open shoes. No more squeezing or reversing laces to get in.

Easily slip into wide open shoes. No more squeezing or reversing laces to get in.

Pop out hands-free – Firmly step on your opposite heel and lift ankle to pop out hands-free. 

Firmly step on your opposite heel and lift ankle to pop out hands-free.

Re-use on new shoes – Buy one pair of Zubits and re-use them on all your new pairs of shoes. The magnets never lose their strength.

Buy one pair of Zubits and re-use them on all your new pairs of shoes. The magnets never lose their strength.

A clean looking shoe – Lose the floppy bows and get a clean looking shoe. Plus, keep the laces that were designed for your shoes.

Lose the floppy bows and get a clean looking shoe. Plus, keep the laces that were designed for your shoes.

Shoes become slippers – With a wide open shoe and no laces dragging on the ground, many people use Zubits closures just like slippers for short use like getting the mail or walking around the campsite.

With a wide open shoe and no laces dragging on the ground, many people use Zubits closures just like slippers for short use like getting the mail or walking around the campsite.

3 Sizes – After the campaign ends, you will be sent a survey asking you to choose your preferred size and color for each pair of Zubits closures you purchased. The survey will explain the size choices thoroughly to help you decide. Larger sizes hold more secure but are harder to split open. Smaller sizes are easier for kids to open yet strong enough for play and running.

After the campaign ends, you will be sent a survey asking you to choose your preferred size and color for each pair of Zubits closures you purchased. The survey will explain the size choices thoroughly to help you decide. Larger sizes hold more secure but are harder to split open. Smaller sizes are easier for kids to open yet strong enough for play and running.

Bling, style, flair – Add some serious bling to your kicks. Clean up those floppy laces. And of course, make your sneakers easier.

Add some serious bling to your kicks. Clean up those floppy laces. And of course, make your sneakers easier.

Active & athletic use – Zubits closures are incredibly strong. They keep up with your various athletic needs.

A clean look, no messy bows – Get a clean looking shoe without a floppy bow. Now more than ever, Zubits closures give you style.

Many Uses – Magnets do many things… helping those with special needs, organizing shoes, making shoes easier for kids, making lots of activities easier!

 

SUPPORT THEIR CAMPAIGN: https://www.kickstarter.com/projects/ryw/zubits-magnetic-lacing-metallics-never-tie-laces-again

Share This Article
Facebook Twitter Copy Link

Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Marketing banner displaying services: custom WordPress design, SEO optimization, and website maintenance.

Trending

Surplex wants to bring body-tracking shoes to virtual reality

Even in virtual reality, Surplex knows the importance of quality footwear. The VR company’s latest…

August 21, 2022

Thinnest 3D Printed Insole Yet Launched by Aetrex

In February a year ago, Aetrex, known for its generally made insole and footwear shopper…

September 15, 2020

3D Printing Is Changing The Way You Buy Shoes

3D printing is progressively changing the way that we can buy our shoes. Companies are…

February 1, 2016
5.9kLike
4kFollow
3.7kPin
3.7kFollow
Innovation & Trends

3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes

Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design

Introduction: Why 2025 Is the Tipping Point for Additive ManufacturingAdditive manufacturing has flirted with the mainstream for more than a decade, but 2025 is the first year it’s shipping finished…

R_Shoes May 8, 2025

Your may also like!

Hand holding Adidas’ fully 3D-printed Climacool sneaker, showing its seamless lattice design
Innovation & Trends

3D Printing Breakthroughs to Watch in 2025: Sustainable Materials, Living Tissues & Hyper-Fast Processes

R_Shoes May 8, 2025
CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
Project-Based Courses

CAD for Kids – Build, Create & Learn — Our Full Project-Based Review

R_Shoes May 8, 2025
Side-by-side comparison of the Adidas 3D-Printed ClimaCool (left) and the Zellerfeld HEZI Slide (right), showing the ClimaCool’s fine hex lattice versus the HEZI Slide’s thicker diamond lattice.
Innovation & Trends

Adidas ClimaCool vs Zellerfeld 3D-Printed Shoes: Which Futuristic Sneaker Wins?

R_Shoes May 5, 2025
Maple Yumei Qiu poses with Umei shoes outside of her Manhattan Beach home recently. (Photo by Melissa Heckscher, The Beach Reporter/SCNG)
News

How a Mom’s Love Sparked a Footwear Revolution: The Story Behind UMEI’s 3D-Printed Recovery Slides

R_Shoes May 1, 2025
loader

Our website stores cookies on your computer. They allow us to remember you and help personalize your experience with our site.

Read our privacy policy for more information.

Quick Links

  • Home
  • About
  • STL Files
  • Contact

Legal

  • Privacy Policy
  • Cookie Policy (EU)
  • Disclaimer
  • Terms & Conditions

Socials

Follow US
Crafted with love by PixelCrafted.Dev ❤
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
View preferences
{title} {title} {title}
Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Zero spam, Unsubscribe at any time.
adbanner
AdBlock Detected
Our site is an advertising supported site. Please whitelist to support our site.
Okay, I'll Whitelist
Welcome Back!

Sign in to your account

Lost your password?