3D Shoes 3D Shoes
  • News
    NewsShow More
    Panoramic view of Koobz’s Ventura 3D‑printing farm with multiple printers running in parallel.
    Koobz Raises $7.2 Million: How an 800‑Printer “Sneaker Factory” Could Kick‑Start the 3D‑Printed Footwear Revolution
    June 25, 2025
    Array of low-temperature 3D-printed glass test shapes created at MIT Lincoln Laboratory
    Low-Temperature 3D-Printed Glass: MIT’s Inorganic-Composite Ink Revolution
    June 23, 2025
    adidas Is Dropping A Laced Version Of The Climacool
    Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying
    June 20, 2025
    Close-up of Faith Kipyegon adjusting the Nike FlyWeb bra, highlighting open TPU mesh texture.
    Game-Changer or Gimmick? Can Nike’s 3D-Printed FlyWeb Bra Really Revolutionize Women’s Running?
    June 14, 2025
    Featured image of How 3D Printing Production for Sports Shoes Can Work
    How All3DP Broke the Story on HP × Something Added’s Plan to Mass-Produce 3D-Printed Sports Shoes
    May 28, 2025
  • Design
    DesignShow More
    adidas Is Dropping A Laced Version Of The Climacool
    Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying
    June 20, 2025
    Side profile of the red 3-D-printed Nike Air Max 1000 prototype
    Nike Air Max 1000 vs Adidas 4DFWD 3: Can Either 3‑D‑Printed Sneaker Survive 500+ Miles?
    June 16, 2025
    A pigmented O° shoe featuring a black 3D-printed structure overlaying a grey textile base layer Image: Courtesy of OXMAN
    OXMAN’s O° Platform: Pioneering 100% Biodegradable 3D-Printed Footwear
    January 29, 2025
    The First AI Shoe
    Stepping into the Future: Reebok’s Co-Founder Teams Up with Young Innovator to Revolutionize Footwear through AI and 3D Printing
    January 23, 2025
    CamperLab’s Tossu Shoe Gets an Update From Mr. Bailey’s Concept (K)
    CamperLab x Mr. Bailey’s Tossu Shoe – A Design Revolution
    December 17, 2024
  • Trends
    TrendsShow More
    High-resolution collage featuring five popular running shoes — Nike Invincible 4, HOKA Bondi 9, ASICS GEL-Nimbus 27, New Balance FuelCell SC Elite v4, and Adidas 4DFWD — recommended for an EPU 45 midsole upgrade.
    5 Running Shoes That Need Carbon’s EPU 45 Foam (But Probably Won’t Get It Yet)
    June 10, 2025
    Sean Wotherspoon's Sean Double U
    One Pair, One Purpose: The Philosophy Behind Sean Wotherspoon’s Dual Silhouettes
    June 9, 2025
    Digital collage of 10 recycled sneakers from top brands in 2025, showcasing eco-friendly materials like ocean plastic, algae foam, and knit uppers
    10 Shoe Brands Turning Trash into Trend: The Rise of Recycled Footwear in 2025
    June 4, 2025
    Close-up of Adidas 4D-printed midsole showing breathable lattice structure
    Are 3D-Printed Shoes Worth It in 2025? What Sneaker Brands Don’t Want You to Know
    June 2, 2025
    Formlabs Form 1 desktop SLA/DLP printer building a small test geometry
    Photosensitive PEEK: Build 250 °C, Space‑Grade Parts on a Desktop DLP Printer
    May 26, 2025
  • Recommended Picks
    Recommended PicksShow More
    High-resolution collage featuring five popular running shoes — Nike Invincible 4, HOKA Bondi 9, ASICS GEL-Nimbus 27, New Balance FuelCell SC Elite v4, and Adidas 4DFWD — recommended for an EPU 45 midsole upgrade.
    5 Running Shoes That Need Carbon’s EPU 45 Foam (But Probably Won’t Get It Yet)
    June 10, 2025
    Anycubic Wash & Cure 3
    Budget vs. Premium: Which Wash & Cure Station Is Right for You in 2025?
    June 5, 2025
    CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
    CAD for Kids – Build, Create & Learn — Our Full Project-Based Review
    May 8, 2025
    Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    🎀 Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    April 29, 2025
    3D Printing from Zero to Hero in Blender – FDM & MSLA - Course Review
    3D Printing from Zero to Hero in Blender – FDM & MSLA: Build, Create & Learn — Our Full Project-Based Review
    April 12, 2025
Reading: AiFeet Makes 3D-Printed Elastic Insoles Customized To Every Curve And Contour Of Your Feet
Fuel Our Steps
Font ResizerAa
3DSHOES.COM3DSHOES.COM
  • News
  • Design
  • Recommended Picks
  • STL Files
Search
  • Home
  • News
  • Design
  • Recommended Picks

100 Percent 3D Shoes

R_Shoes R_Shoes June 26, 2024
5.9kLike
4kFollow
3.7kPin
3.7kFollow
  • Home
  • About
  • STL Files
  • Contact
© 2024 3DSHOES.com. All Rights Reserved.
3DSHOES.COM > News > News > AiFeet Makes 3D-Printed Elastic Insoles Customized To Every Curve And Contour Of Your Feet
News

AiFeet Makes 3D-Printed Elastic Insoles Customized To Every Curve And Contour Of Your Feet

R_Shoes
Last updated: June 27, 2024 2:22 am
By R_Shoes 4 Min Read
Share
SHARE

Using aftermarket insoles is one of the easier ways to make any footwear a whole lot more comfortable. Whether you’re spending the day in a pair of sneakers, work boots, or dress shoes, a well-designed insole that fits your foot better and comes with more supportive materials just elevates the experience significantly. While there are plenty of aftermarket insoles out there, the AiFeet aims to do them one better by coming in a custom fit that’s designed specifically for each individual.

No, you can’t get this off the shelf like the Dr. Scholls you’re using with your favorite work shoe. That’s because each one is 3D-printed according to your feet’s individual specifications, ensuring a perfect fit that recreates every curve and contour of your feet.

The LuxCreo AiFeet are insoles made of a high-performance elastic resin called EM+21, a material that, the outfit claims, is equipped with high elasticity, high tenacity, and high resiliency, giving the insole superior shock absorption. That means, the insole can absorb a lot of impact that would otherwise be passed on to your ankles and knees, making this ideal not just for walking but for exercise and similar vigorous physical activities. The resin also boasts superior durability compared to EVA foam (the material most frequently used for insoles), as it’s been tested to only decrease by 5 percent in thickness after 1,000,000 fatigue cycles while EVA decreases by an average of 30 percent after just 300,000 fatigue cycles.

It uses a 3D-printed mesh matrix structure with optimized thickness at strategic sections, allowing it to provide stiffness where necessary (e.g. arch support), all while retaining its elasticity to help cushion every step and stride you take. That mesh structure also makes it very breathable, as air is able to circulate all around the insole, all while allowing any moisture to pass through, which should help minimize, if not outright eliminate, any sweating on your feet.

Don’t worry, you won’t have to go in to LuxCreo AiFeet’s offices for a custom fitting. Instead, you simply download their app and use it with your phone’s camera to scan the bottom of your feet, which it will use to automatically create a customized plantar pressure map. From there, you place an order, which will go directly to the factory for printing. According to the outfit, the whole process of getting a custom insole should take around three days, with the entire ordering process done from the app. We’re assuming, of course, you can also reorder additional insoles using the captured measurements from the same app, so all your subsequent orders should be even easier.

Because sweat doesn’t accumulate on the insole, it doesn’t develop any odors, making it very easy to maintain over time. It’s also pretty easy to clean if it does get soiled, as the mesh design means you can simply run it under the tap to easily wash off any dirt or stain. Suffice to say, if it does provide the custom comfort level it promises, this is an excellent way to immediately elevate all of your footwear.

A Kickstarter campaign is currently running for the AiFeet. You can reserve a unit for pledges starting at $10.

 

 

SUPPORT THEIR CAMPAIGN: https://www.kickstarter.com/projects/bisca360/100-fit-exclusive-custom-made-3d-printed-insoles-for-you

 

ARTICLE SOURCE: https://www.coolthings.com/luxcreo-aifeet-custom-3d-printed-insoles-elastic-resin/

Share This Article
Facebook Twitter Copy Link

Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

PixelCrafted banner ad bold headline ‘Websites That Sell’, tagline ‘Custom WordPress builds that convert’, button ‘Get a Free Mockup’.

Trending

Reebok The future of 3D Shoes

As a struggling footwear brand, Reebok knows it needs to be at the forefront of…

July 21, 2017

LJMU’s FabLab takes first steps into fashion with 3D printed shoes featured at the British Style Collective event in Liverpool.

3D printed shoes: one small step for man, one giant leap for fashion With 3D…

May 8, 2022

Creality 3D Printer Tool Kit: The Ultimate 74-Piece Accessory Set for All Your 3D Printing Needs

IntroductionHey there, 3D printing enthusiast! Whether you're just starting out or you've been printing masterpieces…

July 26, 2024
5.9kLike
4kFollow
3.7kPin
3.7kFollow
Innovation & Trends

One Pair, One Purpose: The Philosophy Behind Sean Wotherspoon’s Dual Silhouettes

Sean Wotherspoon's Sean Double U

From curating vintage treasures on Melrose to reinventing sustainable sneakers, Sean Wotherspoon doesn’t just design shoes—he crafts cultural moments. His celebrated collaborations with adidas, Gap, and Porsche have consistently merged…

R_Shoes June 9, 2025

Your may also like!

Panoramic view of Koobz’s Ventura 3D‑printing farm with multiple printers running in parallel.
News

Koobz Raises $7.2 Million: How an 800‑Printer “Sneaker Factory” Could Kick‑Start the 3D‑Printed Footwear Revolution

R_Shoes June 25, 2025
Array of low-temperature 3D-printed glass test shapes created at MIT Lincoln Laboratory
News

Low-Temperature 3D-Printed Glass: MIT’s Inorganic-Composite Ink Revolution

R_Shoes June 23, 2025
adidas Is Dropping A Laced Version Of The Climacool
DesignNews

Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying

R_Shoes June 20, 2025
Side profile of the red 3-D-printed Nike Air Max 1000 prototype
Design

Nike Air Max 1000 vs Adidas 4DFWD 3: Can Either 3‑D‑Printed Sneaker Survive 500+ Miles?

R_Shoes June 16, 2025
loader

Our website stores cookies on your computer. They allow us to remember you and help personalize your experience with our site.

Read our privacy policy for more information.

Quick Links

  • Home
  • About
  • STL Files
  • Contact

Legal

  • Privacy Policy
  • Cookie Policy (EU)
  • Disclaimer
  • Terms & Conditions

Socials

Follow US
Crafted with love by PixelCrafted.Dev ❤
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
View preferences
{title} {title} {title}
Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Zero spam, Unsubscribe at any time.
adbanner
AdBlock Detected
Our site is an advertising supported site. Please whitelist to support our site.
Okay, I'll Whitelist
Welcome Back!

Sign in to your account

Lost your password?