3D Shoes 3D Shoes
  • News
    NewsShow More
    Panoramic view of Koobz’s Ventura 3D‑printing farm with multiple printers running in parallel.
    Koobz Raises $7.2 Million: How an 800‑Printer “Sneaker Factory” Could Kick‑Start the 3D‑Printed Footwear Revolution
    June 25, 2025
    Array of low-temperature 3D-printed glass test shapes created at MIT Lincoln Laboratory
    Low-Temperature 3D-Printed Glass: MIT’s Inorganic-Composite Ink Revolution
    June 23, 2025
    adidas Is Dropping A Laced Version Of The Climacool
    Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying
    June 20, 2025
    Close-up of Faith Kipyegon adjusting the Nike FlyWeb bra, highlighting open TPU mesh texture.
    Game-Changer or Gimmick? Can Nike’s 3D-Printed FlyWeb Bra Really Revolutionize Women’s Running?
    June 14, 2025
    Featured image of How 3D Printing Production for Sports Shoes Can Work
    How All3DP Broke the Story on HP × Something Added’s Plan to Mass-Produce 3D-Printed Sports Shoes
    May 28, 2025
  • Design
    DesignShow More
    adidas Is Dropping A Laced Version Of The Climacool
    Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying
    June 20, 2025
    Side profile of the red 3-D-printed Nike Air Max 1000 prototype
    Nike Air Max 1000 vs Adidas 4DFWD 3: Can Either 3‑D‑Printed Sneaker Survive 500+ Miles?
    June 16, 2025
    A pigmented O° shoe featuring a black 3D-printed structure overlaying a grey textile base layer Image: Courtesy of OXMAN
    OXMAN’s O° Platform: Pioneering 100% Biodegradable 3D-Printed Footwear
    January 29, 2025
    The First AI Shoe
    Stepping into the Future: Reebok’s Co-Founder Teams Up with Young Innovator to Revolutionize Footwear through AI and 3D Printing
    January 23, 2025
    CamperLab’s Tossu Shoe Gets an Update From Mr. Bailey’s Concept (K)
    CamperLab x Mr. Bailey’s Tossu Shoe – A Design Revolution
    December 17, 2024
  • Trends
    TrendsShow More
    High-resolution collage featuring five popular running shoes — Nike Invincible 4, HOKA Bondi 9, ASICS GEL-Nimbus 27, New Balance FuelCell SC Elite v4, and Adidas 4DFWD — recommended for an EPU 45 midsole upgrade.
    5 Running Shoes That Need Carbon’s EPU 45 Foam (But Probably Won’t Get It Yet)
    June 10, 2025
    Sean Wotherspoon's Sean Double U
    One Pair, One Purpose: The Philosophy Behind Sean Wotherspoon’s Dual Silhouettes
    June 9, 2025
    Digital collage of 10 recycled sneakers from top brands in 2025, showcasing eco-friendly materials like ocean plastic, algae foam, and knit uppers
    10 Shoe Brands Turning Trash into Trend: The Rise of Recycled Footwear in 2025
    June 4, 2025
    Close-up of Adidas 4D-printed midsole showing breathable lattice structure
    Are 3D-Printed Shoes Worth It in 2025? What Sneaker Brands Don’t Want You to Know
    June 2, 2025
    Formlabs Form 1 desktop SLA/DLP printer building a small test geometry
    Photosensitive PEEK: Build 250 °C, Space‑Grade Parts on a Desktop DLP Printer
    May 26, 2025
  • Recommended Picks
    Recommended PicksShow More
    High-resolution collage featuring five popular running shoes — Nike Invincible 4, HOKA Bondi 9, ASICS GEL-Nimbus 27, New Balance FuelCell SC Elite v4, and Adidas 4DFWD — recommended for an EPU 45 midsole upgrade.
    5 Running Shoes That Need Carbon’s EPU 45 Foam (But Probably Won’t Get It Yet)
    June 10, 2025
    Anycubic Wash & Cure 3
    Budget vs. Premium: Which Wash & Cure Station Is Right for You in 2025?
    June 5, 2025
    CAD for kids course review covers a 16-week program taking learners from CAD sketch to 3D-printed model, summarizing projects, skills and required tools.
    CAD for Kids – Build, Create & Learn — Our Full Project-Based Review
    May 8, 2025
    Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    🎀 Best Subscription Boxes for Moms This Mother’s Day (2025 Gift Guide)
    April 29, 2025
    3D Printing from Zero to Hero in Blender – FDM & MSLA - Course Review
    3D Printing from Zero to Hero in Blender – FDM & MSLA: Build, Create & Learn — Our Full Project-Based Review
    April 12, 2025
Reading: ONLINE 3D FOOTWEAR DESIGN IN RHINO COURSE
Fuel Our Steps
Font ResizerAa
3DSHOES.COM3DSHOES.COM
  • News
  • Design
  • Recommended Picks
  • STL Files
Search
  • Home
  • News
  • Design
  • Recommended Picks
Akane Wakai, Ph.D. ’24, and Jennifer Bustillos, Ph.D. ’24, prepare a sample at the Cornell High Energy Synchrotron Source.

Advances in Controlling Metal Microstructure in Additive Manufacturing

R_Shoes R_Shoes February 16, 2025
5.9kLike
4kFollow
3.7kPin
3.7kFollow
  • Home
  • About
  • STL Files
  • Contact
© 2024 3DSHOES.com. All Rights Reserved.
3DSHOES.COM > News > News > ONLINE 3D FOOTWEAR DESIGN IN RHINO COURSE
News

ONLINE 3D FOOTWEAR DESIGN IN RHINO COURSE

R_Shoes
Last updated: June 26, 2024 10:16 pm
By R_Shoes 5 Min Read
Share
ONLINE 3D FOOTWEAR DESIGN IN RHINO COURSE
SHARE

ONLINE 3D FOOTWEAR DESIGN IN RHINO COURSE
September 16 – October 27, 2019 

 

 

 

Yes! It is ready for registration: our online course for 3D footwear design in Rhino. We have given many of these courses offline, so we know it is a steep learning curve. That is why we have developed a course that combines video exercises with live webinars. Watch the video below for more information and check the course page on our FOOTWEAROLOGY online academy.

 

 

FOOTWEAROLOGY FOR THE FUTURE

For the online Rhino course we intentionally chose an upper with a current, molded construction. If you want to know more about the latest footwear manufacturing technologies and how you can apply these to make footwear more sustainable, then register for our Footwearology for the Future online course. We now also offer a very attractive bundle to combine this course with the online Rhino program. You can check the video below for more info, or go to the course page.

 

 

GRASSHOPPER FOR FOOTWEAR IN NEW YORK!

Unless you already have experience in Rhino, the new online Rhino training is also a requirement for people who are looking to expand their digital design skills even further and want to join our upcoming Grasshopper for Footwear training in New York from November 4-8. This 5-day Grasshopper intensive in collaboration with Ultimaker 3D printers is meant for footwear professionals that want to be able to create complex structures like lattices and voronoids, for both uppers and soles. You can find more information here.

 

 

CURATED TOUR OF DUTCH DESIGN WEEK

Every now and then you will have to get away from the computer screen though and open your mind to new ideas in the ‘real world’. So let us take you on a tour of the most inspiring design event in the world: DUTCH DESIGN WEEK, one of the largest and most influential design festivals in the world, especially when it comes to sustainable design… AND FOOTWEAR! The Netherlands have at least 9 academies with footwear programs, from hand crafted shoes, to high-fashion, high-tech, biotech and orthopedic. And all of them exhibit here! This huge event that attracts more than 355.000 international visitors takes place in and around Eindhoven, spread out over many locations, so you have to know where to go! Let us take you by the hand on our curated two-day tour on October 23 and 24, 2019.

 

 

FROM BIG DATA TO FOOTWEAR AND BACK – FOOTWEARISM II

If you stay another day in Eindhoven, you can join the next edition of our FOOTWEARISM conference, which will take place on the afternoon of October 25, 2019. This time it will be in collaboration with Eindhoven University of Technology and it focuses on how big data will be materialized in footwear. We will not just pay attention to the technological developments that will make this possible, but also on the legal and cultural changes that will need to happen simultaneously.

 

 

LEARN HOW WE WILL CREATE MOLDS, UPPERS AND SOLES IN RADICALLY NEW WAYS AT THE FOOTWEAR MATERIALS SUMMIT IN PORTLAND!

Speaking of conferences: we are lecturing at several of them in the coming months, about a wide variety of topics. You can find the full schedule here. We are currently preparing for the most spectacular panel discussion we have ever done! This will take place as part of FDRA’s Footwear Materials Summit in Portland on August 13. It will focus on new material application technologies, including entirely new ways of creating molds, uppers and soles. We will talk with:

  • Stuart Jenkins, BLUMAKA
  • Noud Steffens, Segment Leader, DSM Additive Manufacturing
  • Travis Busbee, CEO, Voxel8
  • Steven Tsai, Head of 125 Innovation Lab, Peak Sport
  • Walter Voit, CEO Adaptive 3D

FDRA is offering a special discount for relations of THE FOOTWEARISTS. Email us if you would like to receive the secret coupon code!.

 

 

ATTENTION: if you want to stay updated on daily footwear innovation news, then follow us on INSTAGRAM. This is where we post most regularly. 

 

#3DShoes #3DPrintedShoes #3DPrinted

Share This Article
Facebook Twitter Copy Link

Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

PixelCrafted banner ad bold headline ‘Websites That Sell’, tagline ‘Custom WordPress builds that convert’, button ‘Get a Free Mockup’.

Trending

ROOTS: Biodegradable 3D-Printed Designer Footwear

Material science company Balena & Designer Kitty Shukman Harness 3D-Printing, Uniquely Compostable Materials & Nature to…

July 24, 2023

Armis Slide 3D Shoes

Crocs, as much as their appeal has plummeted, revolutionized the ability for a shoe to…

July 20, 2020

Chemist Unlocks Plastic Alternatives Using Proteins And Clothing Scraps

Challa Kumar, professor emeritus of chemistry, in his lab. Credit: University of Connecticut   Every…

November 18, 2023
5.9kLike
4kFollow
3.7kPin
3.7kFollow
Innovation & Trends

One Pair, One Purpose: The Philosophy Behind Sean Wotherspoon’s Dual Silhouettes

Sean Wotherspoon's Sean Double U

From curating vintage treasures on Melrose to reinventing sustainable sneakers, Sean Wotherspoon doesn’t just design shoes—he crafts cultural moments. His celebrated collaborations with adidas, Gap, and Porsche have consistently merged…

R_Shoes June 9, 2025

Your may also like!

Panoramic view of Koobz’s Ventura 3D‑printing farm with multiple printers running in parallel.
News

Koobz Raises $7.2 Million: How an 800‑Printer “Sneaker Factory” Could Kick‑Start the 3D‑Printed Footwear Revolution

R_Shoes June 25, 2025
Array of low-temperature 3D-printed glass test shapes created at MIT Lincoln Laboratory
News

Low-Temperature 3D-Printed Glass: MIT’s Inorganic-Composite Ink Revolution

R_Shoes June 23, 2025
adidas Is Dropping A Laced Version Of The Climacool
DesignNews

Adidas Climacool Laced 2025 Release: What You Need to Know Before Buying

R_Shoes June 20, 2025
Side profile of the red 3-D-printed Nike Air Max 1000 prototype
Design

Nike Air Max 1000 vs Adidas 4DFWD 3: Can Either 3‑D‑Printed Sneaker Survive 500+ Miles?

R_Shoes June 16, 2025
loader

Our website stores cookies on your computer. They allow us to remember you and help personalize your experience with our site.

Read our privacy policy for more information.

Quick Links

  • Home
  • About
  • STL Files
  • Contact

Legal

  • Privacy Policy
  • Cookie Policy (EU)
  • Disclaimer
  • Terms & Conditions

Socials

Follow US
Crafted with love by PixelCrafted.Dev ❤
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Manage options Manage services Manage {vendor_count} vendors Read more about these purposes
View preferences
{title} {title} {title}
Stay Up To Date!

Sign up for 3DShoes.com's mailing list where you will stay up-to-date with latest trends, drops, and more.

loader

Zero spam, Unsubscribe at any time.
adbanner
AdBlock Detected
Our site is an advertising supported site. Please whitelist to support our site.
Okay, I'll Whitelist
Welcome Back!

Sign in to your account

Lost your password?